Clima and air conditioning technology

Fiber mat cling active oiled GF-50/GF-100 The fiber media consists of progressive composed fiber media, which is made of melted cullet. The media is impregnated with an antibacterial dust collecting agent. On the clean air side is a supporting tissue what brings an effective stability, specialy by continuous working importend. The fields of application of this fiber product is the automobile and automotve industry, since several years. Fire behavior: self-extinguishing acc. DIN 53 438 cl. F1
syntetic rough dust pocket filter types: RSTF 80/2 G3, RSTF 80/2 G4 und RSTF 80/3 F5 The high quality syntetic filter media consists of finest polyester fiber. The filter pockets are very stabil according a special welding. By this filters a metal frame is standard. This pocket filters are also abailable as burnable version with plastic frame. This filter is able as pre filter for fields of application in the clima, air conditioning plus painting cabin and also for heat recovery systems. The number of pockets and the depth is in all demmensions available.
Rough dust filter R 15-150/350/500 (G2-G4) Fields of application Filter mats made for pre and rough filtration of the suction air in air conditioning systems for a high level in the industry, machinery, cooling systems and compressor systems. It provides a balanced separation in areas with a very high air budget and under extreme conditions and are able to regenerate. This serie are often washable and includes also a very high dust collecting capacity with a low damage of air pressure. Therefor it is very cost effective and has a log life time. Media This filter media consists of high level fiber and is arranged in some degreasing close by layers, it results a very high dust colection capacity with a low demage of pressure plus a gravimetric grade of separation acc. EN-779. The fiber of the serie R15 is bounded in a deeping bath and in adition increased, to realizze a very high stability and also a very high dust collecting capacity. The filter media are made of fiber and adhasive agent and is resistant contra chmical influence like solvent or acid steam plus it is very stabil contra pressure. According the stability, the filter media is to use again several times after washing with warm water. The clean air side is smoothed for a correct installation as cut, roll, of pocket filter and also labeled with the type. The R15 media agrees with all fire rules of the European Union (DIN 53438-F1) and are self-extinguishing. The independence quality control acc. EN 779 realizze a constant quality together with the G2-, G3- or G4-classification.
Rogh dust filter RSB-290/300 (G3-G4) Fields of application The RSB-filter mats are made for the rogh or pre filtering of the incoming air in clima of air conditioning systems of buildings, offices, fabric buildings and other applications. It realizze a balanced dust separation in areas with a high air volume or hard contaminated ambiants air. The serie RSB is combining a high dust collecting capacity with a low demage pressure. Therefor it is very cost efficiency. Media The filter media are made of no-breakable high tech seam and arranged in some degreasing close by layers, results a very high dust collecting capacity with a low demage of pressure, plus a very high separating ratio. This filter media are thermis bunded and increased, to realizze a very high dust collecting capacity. The clean air side is signed with a print to baware you for a mistake by the mountage. This filters agrees with all fire rules of the European Union plus of USA (DIN 53438-F1) and are self-extinguishing. The independent quality control acc. EN 779 plus the individual DIN-Logo and the sign of the type, what all is printed on the clean air side, together with the G2-, G3- or G4-classification realizze a constant quality.
Fine dust filter R3-300 Fields of application This filter mats are made for the fine filtration of the sucktion air of ventilation and air conditioning systems what need a very high level of clean air. Also very effective as rough dust filter in a multi level air filter system plus as diffusion floor filter in painting cabins. The R3-300 combines a very high dust collecting capacity with a low demage of pressure. Therefor it is very cost effective and has a long life time. Media This filter mat based of systetic fiber would developed and will made in our own high tec media fabric. The filter media are made of no-breakable high tech seam and arranged in some degreasing close by layers, results a very high dust colection capacity with a low demage of pressure. This filter media are thermis bunded and the complete filter is impregnated with a special glue, where a release of seam particles is not possible while a vibration of a machine, also by difference of the temperature. The clean air side smoothed and for a montage without mistake it is labeled also with the type. This Filter mat is also an available media for the production of advanced surface filters like catridge filters, fold filter units, pocket filters and more. This filters agrees with all fire rules of the European Union plus of USA (DIN 53438-F1) and are self-extinguishing. It is consistent contra solvent and also 100% free of silicone. The independent quality control acc. EN 779 plus the individual DIN-logo plus the type label , with that all rolls on the clean air side are labeled, can we realizze a constant quality together with the F5-classification.
Fine dust Filter cartridge AirCompact fine dust filter cartridge will be used more and more for separating of particles of different kind in sensible fields of application also in the automobile industry or pharmacy. Micro-fiber vlies or synthetic media (according application) will be folded to a compact element, where folds and height can be different according the field of application. As distance holder will be used hot-melt seams. which makes an optimal using of the filter surface and package depth. All AirCompact air filter elements excels itself by optimal separating grade according large filter surface, by filtration of high stream volume, by short mounage depth and according low running costs, because long term using and low pressure damage.
AirActiv Active cole filter cartridge AK Active cole filter cartridge absorbs gas shaped and ador intensive harmfull substances of the atmospheric air. It is available for the incoming air, for the outgoing air and for circulating air. This active cole cartridges will be used by high concentrated gas and steam. Typical fields of application are airport, for separating of kerosine exhaust, restaurants and canteens for separating of kitchen odor, paper and chemistry industry for separating of gas. Our active cole filter cartridges are developed and increased as alternative for traditional suppliers. The cylinder and teh caps on both ends consists of free of corrosion and light polyethylene. The holder for the bajonet cap are mode of stainless steel. The cartridges are supported with a expanded rubber sealing. The relevant advantage of our active filter cartridges is the used impregnated active cole, which is used in it. Size: 145/457 145/600 Case possibilities: zinc coated steel, stianless steel and plastic
Premuim-active cole filters RAAP RAAF7 The premuim active cole filters is suitable for filtration of smell substances and harmfull substances of the air. All active cole compact filters are available as own absorbtion filter, plus suitable as combi filter with media F7 . All active cole filters free of corrosion and burnable. The frame consists of polystyrole, the filter material of vlies material, coated with high active cole granulate. Available sizes: 592x592x292 mm 490x592x292 mm 287x592x292 mm
Synthetic fine dust pocket filters Types: RSTF 55/6 F5, RSTF 65/6 F6, RSTF 85/6 F7 und RSTF 95/8 F8 The high quality syntetic filter media consists of finest polyester seam. The pocket filters are stabil. The metal frame is standard. The pocket filters are also able with a burnable plastic frame. This filter is able as pre filter for fields of application in the clima, air conditioning plus painting cabin and also for heat recovery systems. The number of pockets and the depth is in all demmensions available.
Syntetic filter mats ROV 20/30/40 This syntetic filter media is a very solid and stabil polyester fibrer vlies with progressive construction. For incoming air and / or circulation air rough filtration in air technic devices and machines. It is suitable for rough filtration of painting cabins and apinting lines form all sizes and suppliers.
Highend-pocket filters stabil F5 Fields of application: The HE F5 specialy will used as prefilter in the automotive area, plus in the clima / air conditioning technology. Also this filter will be in use in areas with oily air. For that area this filter was been developed and testet. Media The pocket filter, based on syntetic fiber, was been developed for fields of application in the automotive area and turbine area . The used polyester media results a high effectivity by having a low pressure damage. This filter results a very long life time and a very high separating grade by having a high dust collecting ratio plus low energy and maintainance costs. This filter are able by high air humidity, oily air and in areas with a very high dust advent. The HE F5 consists of 100% of synthetic, is stabil contra corrosion and humidity and reaches all rules of fire of the EU (DIN 53438-FI) . The natural stabil pocket media with their welded inside tubes results a pocket, which also brings a high process safety by having a very high air pressure or in an area of a very high dust contamination. The silk welded construction, the integrated aerodynamic stabilizer and that in a form stabil and increased plastic frame placed media gives warranty for highest capacity in close to all applications. The independent quality control according EN-779 and the individual DIN-logo plus the proof and control sign, like the construction number, with every unit will be signed, realizzes a stabil quality.
Highend-pocket filters stabil F6 Fields of application: The HE F6 specialy will used as prefilter in the automotive area, plus in the clima / air conditioning technology. Also this filter will be in use in areas with oily air. For that area this filter was been developed and testet. Media The pocket filter, based on syntetic fiber, was been developed for fields of application in the automotive area and turbine area . The used polyester media results a high effectivity by having a low pressure damage. This filter results a very long life time and a very high separating grade by having a high dust collecting ratio plus low energy and maintainance costs. This filter are able by high air humidity, oily air and in areas with a very high dust advent. The HE F6 consists of 100% of synthetic, is stabil contra corrosion and humidity and reaches all rules of fire of the EU (DIN 53438-FI) . The natural stabil pocket media with their welded inside tubes results a pocket, which also brings a high process safety by having a very high air pressure or in an area of a very high dust contamination. The silk welded construction, the integrated aerodynamic stabilizer and that in a form stabil and increased plastic frame placed media gives warranty for highest capacity in close to all applications. The independent quality control according EN-779 and the individual DIN-logo plus the proof and control sign, like the construction number, with every unit will be signed, realizzes a stabil quality.
Highend-pocket filters stabil F7 Fields of application: Pocket filter for air technology in very sensible clima and air conditioning systems, which works in areas with very high air force and very high particle contamination and in which is very clean air nessesary. The HE F7 was been developed as finish filter for gas turbines, but it is also suitable for hospitals, food industry, incoming air systems of automotive, pharmacy, computer and telecommunications rooms and other air conditioning devices. Media The pocket filter, based on syntetic fiber, was been developed for fields of application in the automotive area and turbine area . The used polyester media results a high effectivity by having a low pressure damage. This filter results a very long life time and a very high separating grade by having a high dust collecting ratio plus low energy and maintainance costs. This filter are able by high air humidity, oily air and in areas with a very high dust advent. The HE F6 consists of 100% of synthetic, is stabil contra corrosion and humidity and reaches all rules of fire of the EU (DIN 53438-FI) . The natural stabil pocket media with their welded inside tubes results a pocket, which also brings a high process safety by having a very high air pressure or in an area of a very high dust contamination. The silk welded construction, the integrated aerodynamic stabilizer and that in a form stabil and increased plastic frame placed media gives warranty for highest capacity in close to all applications. The independent quality control according EN-779 and the individual DIN-logo plus the proof and control sign, like the construction number, with every unit will be signed, realizzes a stabil quality.
High temperature filter F6-F8 The high temperature filters was been specialy developed for applications in the automotive area. This products are able for the drying cone as pre of fine filter. The pre filter is able in measurements of 610x610x292 mm und 305x610x292 mm, and consists of a steel-zinc frame with seperators of aluminium and provides with their construction for a very high grade of separation and it has a very long life time. The fine filters are able in the classes F6 and F8. The frame is made of high quality aluminium and the filter media is made of folded fiber paper. Populare measurements are here 915x457x55, 915x457x78, plus 610x610x55 and 610x610x78 . Further measurements are also available.
Metal filters We are able to deliver seamed and pressed filters and filter mats of aluminium, steel, coper, acid and temperature resistant steel, zinc coated material and plastic. Fields of application: - fat- and oil separators -fire protected filters -sound absorbing -protectors for catalysators -dust filters -dry separators -active cole cases with cole cartridges Ask also for special versions.
Roll band filter This media consists if progressive fiber or syntetic media and is impregnated with an antibacterial dust collecting agent. Roll band filter of this version will be used mainly in areas of clima and air conditioning. The dust collecting agent brings an optimal adhasion of the particles and increases the grade of separation. The fiber construction is concentrating progressive to the clean air side and results a very high compressibility. The clean air side is increased with a grid net. It is passing for all famous case systems of the market, like AAF/CEAG, FARR/SHIRP, TROX, WIESNER.
AirAbsolut particles filter H10-U15 With the increasing development of the technology, reseach, hygiene and compairable fields of application the requirement to the grade of clairity of the circulating air is increasing step by step, in labouratories, production areas and medical areas. In this combination it is named as high sensible areas, that means, a very low contamination of substances can have a very high and negative effect for the awaited results. In this areas particle filters AirAbsolut realizzes warranty of really clean circulation air according very high separation grade and will be in use more often. Constant controls by the production realizzes the very stong rules of this production. Finest micro fiber are the base of this filter media. In a special production process, the micro fiber media will made to a vlies and this vlies will be folded, this act makes a very large filter surface. The AirAbsolut filter modules gets a test certificate in front of the delivery, what warrants, that the requirement in filter capacity and free of leak is reached. High volume streams by low pressure difference results a long life time, what reduces teh runing costs a lot. All standard measurements available in MDF and metal version